vwbg–image-product-1
rud-vwbgv-ring-product-1

VWBG

£92.29

Suitable for all loads which swivel and tilt.

Please choose your product type from the drop-down menu below. To check product measurements where available, please click a diagram image to the left and compare to the specification table below.

Clear selection
SKU: N/A Categories: ,

Product Description

Description

Suitable for all loads which swivel and tilt.

  • Can be loaded in all directions with a 4:1 design factor.
  • Swivelling under full load is permissible provided the inclination angle is not perpendicular to the screw – in direction.
  • Not suitable for permanent swivelling under full load.
  • Can also be supplied with variable (vario) thread lengths.
  • Easy assembly due to the single threaded tapping. High tensile, inspected suspension ring according to EN 1677-4.
  • The surface is both pink powder coated and zinc plated. Patent 4336779-VARIO.
  • Choose the attachment points in such a way that the introduced forces are accommodated by the work piece without being deformed.
  • Make sure the bolting surface is plain.
  • Ensure an appropriate bore depth to facilitate an optimal sitting of the engaging surface. Work piece material, at least 1.0037 (St 37).
  • For light metals, nonferrous heavy metals and grey cast iron, the thread type allocation must be done in such a way that, the WLL of the thread type fulfils the requirements of the respective work piece.
  • Owing to the presence of the ball bearing, in case of a single transportation procedure, fastening with a flat wrench according to DIN 895 or DIN 894 without using an extension is enough. Without a washer, the seat – engaging surface of the VWBG-V (D) must completely and evenly lie onto the surface of the work piece. Is the VWBG-V to be permanently loaded, it must be tightened with a torque of 10 Nm

Other sizes available.

Technical data – Click Here

Additional Information

Standard

One Model