Modular spreader beamsDNV Type Approved Multisec systems from 13T to 250T
UK-manufactured Multisec modular spreader beams for configurable lifting arrangements, available to buy or hire through Durham Lifting with product-selection and project support.
Multi-13 through Multi-250, with published spans up to 22m depending on model and capacity configuration.
Reconfigurable lifting systems for changing spans and project requirements.
A modular spreader beam is assembled from interchangeable end units and struts, allowing the beam length to be reconfigured for different lifting arrangements rather than relying on a single fixed-length beam.
The Multisec core range covers maximum working load limits from 13 tonnes to 250 tonnes. Available span and capacity depend on the selected model and configuration, so the lifting requirement should be checked against the relevant model data before selection.
The core range is DNV Type Approved to DNV-ST-0378. Detailed capacity tables, dimensions, component information and model-specific configuration limits are available on the dedicated Multisec product pages.
Seven standard models from Multi-13 to Multi-250.
Maximum published span can occur at a reduced working load. Open the relevant model data before specifying a beam for a particular load and span.
Hire, purchase or specify the right modular configuration.
Send the load, required span, lifting points and project dates so Durham Lifting can review the correct enquiry route.
Durham Lifting can check hire availability for a suitable modular spreader beam configuration based on load, span and project dates.
Check AvailabilityRequest a purchase quotation or support identifying the Multisec model and configuration that fits the lifting requirement.
Purchase EnquiryFor loads or lifting geometries outside the standard modular range, Durham Lifting can route the requirement into Multisec bespoke lifting-equipment support.
Discuss Requirement
Built for lifts that need span flexibility and controlled load distribution.
The modular format is suited to projects where lifting centres, sling geometry, load distribution or future span requirements make a reconfigurable spreader system useful.
- Offshore and marine lifting
- Renewables and energy projects
- Fabricated structures
- Plant and machinery handling
- Construction lifting
- Industrial shutdowns
- Heavy engineering projects
- Project cargo handling
Modular spreader beam FAQs.
What is a modular spreader beam?
Can I hire a Multisec modular spreader beam?
Are Multisec modular spreader beams DNV Type Approved?
What information should I send?
When would I need a multi-point lifting beam instead?
Need a modular spreader beam for hire or purchase?
Send the load, required span, lifting points, headroom, site conditions and project dates. Durham Lifting can review hire availability, purchase options or a non-standard requirement.