Modular spreader framesFour-point Multisec lifting frames from 13T to 250T
UK-manufactured Multisec modular spreader frames for configurable four-point lifting, available to buy or hire through Durham Lifting with product-selection and project support.
Multi-F13 through Multi-F250, with maximum working load limits from 13T to 250T and published frame spans up to 16m × 16m depending on model and configuration.
Configurable four-point lifting using modular struts and corner units.
A modular spreader frame combines four engineered corner units with interchangeable modular struts to create a configurable four-point lifting arrangement for loads that need support across more than two lifting points.
The Multisec range covers seven standard models from 13 tonnes to 250 tonnes, with frame dimensions selected around the load, lifting centres and required geometry. Capacity depends on the chosen model, frame dimensions and rigging arrangement.
The system reuses modular struts from the Multisec Spreader Beam range with dedicated frame corner units. Detailed model capacity tables, dimensions and configuration limits are available on the relevant Multisec product pages.
Seven modular frame models from Multi-F13 to Multi-F250.
Use the overview to identify the likely model range, then check the relevant capacity data before specifying a frame for a particular load, length and width.
Hire, purchase or specify the right frame configuration.
Send the load, required frame dimensions, lifting points and project dates so Durham Lifting can review the correct enquiry route.
Durham Lifting can check hire availability for a suitable modular spreader frame configuration based on load, required dimensions and project dates.
Check AvailabilityRequest a purchase quotation or support identifying the Multisec frame model and configuration that fits the lifting requirement.
Purchase EnquiryFor loads, lifting points or frame geometry outside the standard modular range, Durham Lifting can route the requirement into Multisec bespoke lifting-equipment support.
Discuss Requirement
For loads that need four-point support and configurable frame geometry.
Modular spreader frames suit lifting operations where several lower pick points, wide load geometry or the need for a configurable frame make a conventional two-point spreader beam unsuitable.
- Four-point lifting operations
- Offshore and marine lifting
- Renewables and energy projects
- Wide or awkward load handling
- Fabricated structures
- Project cargo handling
- Heavy engineering projects
- Custom lifting arrangements
Modular spreader frame FAQs.
What is a modular spreader frame?
Can I hire a Multisec modular spreader frame?
What capacities are available?
What information should I send?
When should I use a spreader frame instead of a spreader beam?
Need a modular spreader frame for hire or purchase?
Send the load, required frame dimensions, lifting points, headroom, site conditions and project dates. Durham Lifting can review hire availability, purchase options or a non-standard frame requirement.