Higher strength-to-size chain system

Grade 10 chain slings G100 assemblies supplied across the UK

Grade 10 chain slings offer increased capacity compared with an equivalent Grade 8 chain diameter. Durham Lifting supplies G100 single and multi-leg assemblies with compatible master links, hooks, connectors and shortening devices selected as one system.

Grade 10 chain sling assembly
G100 chain systemApproximately 25 percent higher working load capacity than an equivalent Grade 8 chain size.
Published size range5 mm to 32 mm published range
Complete assemblyChain, master links, hooks and connecting components specified together.
Grade 10 capability

Higher capacity with a more compact chain size

Published Grade 10 ranges cover chain sizes from 5 mm to 32 mm. The higher grade can allow a smaller or lighter chain assembly for a given requirement, subject to the full lifting arrangement and component selection.

Working load limitConfirmed from chain size, grade, number of legs and working angle.
Effective working lengthSpecified bearing-to-bearing for the required lifting geometry.
Upper connectionMaster link arrangement matched to the crane hook and sling legs.
Lower fittingsCompatible sling hooks, safety hooks or project-specific connections.
01 · Single point

Single-leg

One lifting leg with the required upper and lower connection.

02 · Two points

Two-leg

Paired legs specified around the lifting angle and load geometry.

03 · Three points

Three-leg

Multi-leg assembly with compatible master-link arrangement.

04 · Four points

Four-leg

Four lifting legs for suitable frames, structures and fabricated loads.

Specification support

Selected as a complete lifting assembly

Compatible Grade 10 chain and components selected as a complete system. Capacity must be established from the complete sling rather than chain diameter alone. Send the load, lifting points, intended angles and connection requirements so the correct assembly can be quoted.

Load and lifting pointsWeight, centre of gravity and connection spacing.
Leg arrangementNumber of legs, included angle and load distribution.
Working environmentIndoor, outdoor, temperature and other operating conditions.
Evidence requiredIdentification, certification and any testing requirement.
Common questions

Grade 10 chain sling FAQs

Final assembly selection should always be based on the lifting arrangement and compatible components. Durham Lifting can help turn the available site information into a clear quotation.

Can Grade 10 slings be supplied in multi-leg configurations?

Yes. Single, two, three and four-leg assemblies can be quoted where suitable for the load and lifting-point arrangement.

Do I need to know the chain diameter?

No. Start with the required WLL, leg arrangement, working length and lifting angle. Chain size is selected from the complete requirement.

Can different hooks and fittings be supplied?

Yes. Compatible master links, hooks, connectors and shortening devices can be selected as part of the assembly.

Can a replacement sling be matched?

Send the existing identification tag, photographs and dimensions. The team can review the available information and confirm what else is needed.

Need a Grade 10 chain sling?

Send the WLL, number of legs, working length, fittings and required date.

Request a Grade 10 Quote
Durham Lifting Established 1996
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.