Crosby® 210 Screw Pin Chain Shackles
Durham Lifting are an authorised stocking distributor of Crosby® Shackles
Durham Lifting’s Crosby® G-210 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
Screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications. While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.
Look for the Red Pin®, the mark of genuine Crosby quality.
Available for sale from Durham Lifting. Fast dispatch from the UK.
Description
Technical Data
Description
- Capacities 1/3 thru 55 metric tons, grade 6.
- Forged – Quenched and Tempered, with alloy pins.
- Working Load Limit and grade “6” permanently shown on every shackle.
- Hot Dip galvanized or self coloured.
- Sizes 3/8 inch and below are mechanically galvanized.
- Fatigue rated.
- Shackles 25t and larger are RFID EQUIPPED.
- Shackles can be furnished proof tested with certificates to designated standards, such
as ABS, DNV, Lloyds, or other certification. Proof testing and certificate available when
requested at the time of order, charges will apply. - Approved for use at -40° C (-40° F) to 204° C (400° F).
- All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft•lbf) avg. at
-20° C (-4° F) upon special request. - Meets or exceeds all requirements of ASME B30.26.
Technical Data
Note: Maximum Proof Load is 2 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
The Crosby Shackle Range
Shop by Product Type:
Newton Aycliffe phones are operating as normal.