Tiger Beam Anchors – TYAA

Durham Lifting’s Tiger Beam Anchors are used as anchorage connectors for personal fall arrest systems. They are designed to be attached to Horizontal I-Beams with an attached personal fall arrest system (full body safety harness, shock absorbing lanyard or fall arrest block). The Tiger single jaw sliding clamp can also be attached to Vertical I-Beams.

We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.

CE Certified – CE 1019 These units meet the requirements of EN 795:2012/B and ANSI/ASSE Z359.1-2007

DescriptionCodeBeam Flange SizeWeight (Kg)
Fixed Type
Single-Jaw Sliding
Horizontal & Vertical Beam Use
TYAA1412.5″ to 12″,
6.35 cm to 30.0 cm
2.54
TYAA1422.5″ to 18″,
6.35 cm to 45.0 cm
2.83
TYAA1432.5″ to 24″,
6.35 cm to 60.0 cm
3.12
Fixed Type
Two-Jaw Sliding
Horizontal Beam Use
TYAA2112.5″ to 12″,
6.35 cm to 30.0 cm
1.93
TYAA2122.5″ to 18″,
6.35 cm to 45.0 cm
2.22
TYAA2132.5″ to 24″,
6.35 cm to 60.0 cm
2.51
Mobile (rolling) Type
Two-Jaw Sliding
Horizontal Beam Use
TYAA2312.5″ to 12″,
6.35 cm to 30.0 cm
3.00
TYAA2322.5″ to 18″,
6.35 cm to 45.0 cm
3.28
TYAA2332.5″ to 24″,
6.35 cm to 60.0 cm
3.56